Table of Contents
Advertisement
OperAtiOn
— —
— —
DCO DIMMER BOTTOM FINGER
replacing lamps
When a lamp must be replaced, tap
conducting maintenance on the load, turn off the circuit at the circuit breaker.
power Fail Memory
After a power failure, all Miro devices automatically return to the state that
they were in immediately prior to loss of power. All configuration and scene
control information is preserved.
Tap once
Press and hold
Tap once
Press and hold
When you
see
in the
instructions,
touch the top
of the switch
as directed.
Turn circuit ON
Turn circuit ON
Turn circuit OFF
Turn circuit OFF
to turn off the circuit. If you are
When you
see
in the
instructions,
touch the
bottom of
the switch as
directed.
Advertisement
Table of Contents
