Setting The Scantime; Programme Type (Pty) - Blaupunkt Los Angeles MP71 Operating Instructions Manual

RADIO MODE
Stopping SCAN and continuing listening
to a station
Press the softkey 4 that corresponds
to the "SCA" display item again.
Scanning is stopped and the station that was
scanned last remains active.

Setting the scantime

Press the MENU button 8.
Keep pressing the
til "SCANTIME" appears in the display.
Set the required scantime using the
buttons 7.
and
To close the menu,
press the OK button 5 or MENU but-
ton 8.
The settings are saved.
Note:
The set scantime also applies to scan-
ning carried out in CD, cassette, Mi-
niDisc and CD changer mode (depend-
ing on the car radio's equipment).

Programme type (PTY)

Besides transmitting the station name, some
FM stations also provide information on the
type of programme that they are broadcast-
ing. Your radio can receive and display this
information.
For example, the programme types can be:
CULTURE TRAVEL
SPORT NEWS
ROCK MUSIC
Using the PTY function, you can directly se-
lect stations of a particular programme type.
PTY-EON
If you specify the programme type and start
seek tuning, the unit will switch from the cur-
rent station to a station of the selected pro-
gramme type.
44
button 7 un-
or
JAZZ
POP
Note:
If no station is found that corresponds to
the selected programme type, you will
hear a beep sound and "NO PTY" ap-
pears briefly in the display. The radio
will then retune to the station that was
received last.
If the tuned radio station or another sta-
tion on the broadcasting network broad-
casts the required programme type at a
later point in time, the radio automatical-
ly switches from the currently tuned sta-
tion or from CD mode / CD changer
mode to the station whose programme
type matches the one you selected.
Switching PTY on/off
To use the PTY function,
press the TUNE button > in radio
mode.
The radio functions menu appears in the dis-
play.
Press the softkey 4 that corresponds
to the "PTY" display item.
When PTY is activated, the display briefly
shows the programme type that was select-
ed last. PTY appears in the display.
To return to the main radio menu,
press the TUNE button > or wait eight
seconds.
The settings are saved.
Selecting a programme type and starting
seek tuning
Press the or
The current programme type appears in the
display.
If you want to select another programme type,
keep pressing one of the
7 until the required programme type is
displayed.
Or
button 7.
buttons