Sound And Volume Distribution Settings; Adjusting The Bass; Adjusting The Treble; Loudness - Blaupunkt Los Angeles MP71 Operating Instructions Manual

SOUND AND VOLUME DISTRIBUTION SETTINGS

Sound and volume
distribution settings
Note:
You can adjust the bass, treble and
loudness individually for each audio
source.

Adjusting the bass

Press the AUD button 9.
"BASS" appears in the display.
Press the or
bass.
When you have finished making your changes,
press the AUD button 9.

Adjusting the treble

Press the AUD button 9.
"BASS" appears in the display.
Keep pressing the
til "TREBLE" appears in the display.
To adjust the treble,
press the or
When you have finished making your changes,
press the AUD button 9.

Loudness

The loudness feature can be used to aurally
compensate (boost) the bass at low volume
levels.
Press the AUD button 9.
"BASS" appears in the display.
Keep pressing the
til "LOUD" appears in the display.
To adjust the loudness,
press the or
"LOUD OFF" means loudness is deactivat-
ed; "LOUD 6" means maximum loudness
boost.
When you have finished making your changes,
press the AUD button 9.
button 7 to adjust the
button 7 un-
or
button 7.
button 7 un-
or
button 7.
Adjusting the right/left volume
distribution (balance)
To adjust the balance,
press the AUD button 9.
"BASS" appears in the display.
Keep pressing the
til "BAL" appears in the display.
To adjust the right/left volume distribution,
press the or
When you have finished making your changes,
press the AUD button 9.
Adjusting the front/back volume
distribution (fader)
To adjust the fader,
press the AUD button 9.
"BASS" appears in the display.
Keep pressing the
til "FADER" appears in the display.
To adjust the front/back volume distribution,
press the or
When you have finished making your chang-
es,
press the AUD button 9.

TA-SOUND

You can separately adjust the sound and vol-
ume distribution settings for traffic informa-
tion announcements.
Press and hold the softkey 4 that cor-
responds to the "TA" display item for
longer than two seconds.
"TA-SOUND" appears in the display.
Keep pressing the
til the required parameter appears in the
display.
Make your adjustments using the
button 7.
When you have finished making your changes,
press the AUD button 9.
button 7 un-
or
button 7.
button 7 un-
or
button 7.
button 7 un-
or
or
39