Cd Mode; Switching To Cd Mode; Selecting A Track; Random Play (Mix) - Blaupunkt Calgary CD30 Operating Instructions Manual

You can use this unit to play standard
CDs with a diameter of 12 cm.
Risk of damage to CD drive!
So-called "CD singles" with a diam-
eter of 8 cm and contoured CDs
("shape CDs") are not suitable for
playback in this unit.
We accept no liability for any dam-
age to the CD drive that may occur
as a result of the use of unsuitable
CDs.
If no CD is inserted in the drive.
Gently insert the CD with the
printed side uppermost into the CD
compartment until you feel some
resistance.
The CD will be drawn automatically into
the drive.
Do not use force when inserting the CD.
You must not hinder or assist the drive
as it draws the CD in. Once inserted,
CD playback begins immediately.
If a CD is already inserted in the
drive.
Press the CD•C button 8 until
"CD" appears in the display.
Playback begins from the point at which
it was last interrupted.
Press the or
select the next or previous track.
button : is pressed once, the
If the
current track will be heard again from
the beginning.
12
button : to
Press button 4 (MIX) =.
"MIX CD" will appear briefly in the dis-
play, MIX will light up in the display. The
next randomly selected track will then
be played.
Press button 4 (MIX) = again.
"MIX OFF" appears briefly in the dis-
play and MIX no longer lights up.
You can briefly play all the tracks on a
CD.
Press button 5 (SCAN) =.
Note:
You can set the scanning time.
To stop scanning, press button
5 (SCAN) = again.
The current track will then continue to
be played.
Press the MENU button <.
"MENU" appears in the display.
Keep pressing the
until "SCANTIME" appears in the
display.
Set the required scantime using
buttons :.
the and
When you have finished making
your changes, press the MENU
button <.
button :