Related Manuals for Keys Fitness ST-FIDL
Summary of Contents for Keys Fitness ST-FIDL
- Page 1 Owner’s Manual Read all precautions and instructions in this manual before using this equipment. 215-00001 10/05 Rev B ST-FIDL...
-
Page 2: Table Of Contents
Table of Contents Important Safety Information Before You Start Assembly Parts List Exploded View Warranty Information... -
Page 3: Important Safety Information
• This Strength Trainer unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning. -
Page 4: Before You Start
Before You Get Started THANK YOU for making this Strength Trainer unit a part of your exercise program. Keys Fitness and our Strength Trainer Series assures the very best in value, appear- ance, durability and biomechanics. This manual will guide you through the assembly process. If at any time you are hav- ing trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. -
Page 5: Assembly
Assembly Assembly Hardware Tools Required You will need two adjustable wrenches for assembly or M10 and M6 wrenches. - Page 6 Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. Attach U Base Frame (6) to Main Frame (5) using two Bolts (A3), four Washers (B1) and 2 Nylon Nuts (C1). Items 22 and 23 are pre-installed. Attach the Rear Base (17) to Main Frame (5) using four Bolts (A1) and four Washers (B1).
- Page 7 Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. Attach Seats (2) to the two Seat Supports (15) using four Washers (B2) and four Bolts (A5). Align the holes in the Seat Support (15) with the holes in the bracket that is welded to the main frame.
- Page 8 Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. Attach the Backrest Board (3) to the Backrest Support (8) using four Washers (B2) and four Bolts (A5). Push two Bushings (24) into Leg Developer (12). Install the Leg Developer (12) onto the Main Frame with one Bolt (A4), two Washers (B1) and one Aircraft...
-
Page 9: Assembly
Frame. Secure in place using the Quick Release Pin (11). Attach the Arm Curl Pad (1) to the top of the Arm Curl Stand (4) using two Bolts (a1) and two Washers (B1). Congratulations!!! You have completed assembly of your ST-FIDL. -
Page 10: Parts List
Parts List Ref # ST-FIDL Parts List Rev B Part # Description 228-00153 ARM CURL PAD, ST-FIDL (GREY/BLACK) 228-00154 SEAT, ST-FIDL (GREY/BLACK) 228-00155 BACKPAD, ST-FIDL (GREY/BLACK) 223-00656 ARM CURL STAND, ST-FIDL 223-00784 MAIN FRAME, ST-FIDL (SILVER) 223-00785 U SHAPED BASE, ST-FIDL (SILVER) -
Page 11: Exploded View
Exploded View... -
Page 12: Warranty Information
STRENGTH TRAINER WARRANTY Keys Fitness Products LP warrants this product for a period of 90 days on parts and lifetime on the frame from the original date of purchase. This warranty covers the product from defects in materials and workmanship for the original purchaser. Using this product for commercial purposes, products damaged by misuse, abuse, or from shipping, moving and storage will void this warranty. - Page 13 Keys Fitness Products, L.P. 4009 Distribution Drive, Suite 250 Garland, Texas 75041 Customer Service: 1-800-683-1236...