• This Strength Trainer unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning.
This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service technicians on site to take care of you, our valued customer.
Assembly NOTE: Hand Tighten bolts and nylon nuts until machine is fully assembled Insert the Leg Developer Holder (01) into the front opening of Main Frame and secured with a knob bolt. Attach the Leg Developer (02) to the bracket of the Leg Holder (01), and assemble use one Hex Bolt M10X75 (03), two Washers D10 (04) and one Aircraft nut (05).
To contact us for customer service or replacement parts, call 1-888-340-0482. CUSTOMER SERVICE If you have any questions regarding this or any Keys Fitness product, or if we may be of assistance in any way, please do not hesitate to call our toll free number 1-888-340-0482.
Page 9
Keys Fitness Products, L.P. 4009 Distribution Drive, Suite 250 Garland, Texas 75041 Customer Service: 1-888-340-0482...
Need help?
Do you have a question about the Strength Trainer ST-LEG and is the answer not in the manual?
Questions and answers