Brother MFC-7470D Basic User's Manual page 136

Level 1 Level 2
6.Network 1.TCP/IP
(MFC-7860DN)
See Network User's Guide.
The factory settings are shown in Bold with an asterisk.
128
Level 3 Level 4
1.Boot Method —
—
2.IP Address
3.Subnet Mask —
—
4.Gateway
—
5.Node Name
6.WINS Config —
7.WINS Server —
—
8.DNS Server
—
9.APIPA
—
0.IPv6
Options Descriptions
Chooses the Boot
Auto*
method that best
Static
suits your needs.
RARP
BOOTP
DHCP
[000-255]. [000-255]. Enter the IP
[000-255]. [000-255] address.
[000-255]. [000-255]. Enter the Subnet
[000-255]. [000-255] mask.
[000-255]. [000-255]. Enter the Gateway
[000-255]. [000-255] address.
Enter the Node
BRNXXXXXXXXXXXX
name.
Chooses the WINS
Auto*
configuration
Static
mode.
Specifies the IP
Primary
address of the
[000-255]. [000-255].
primary or
[000-255]. [000-255]
secondary WINS
server.
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Specifies the IP
Primary
address of the
[000-255]. [000-255].
primary or
[000-255]. [000-255]
secondary DNS
server.
Secondary
[000-255]. [000-255].
[000-255]. [000-255]
Automatically
On*
allocates the IP
Off
address from the
link-local address
range.
Enable or Disable
On
the IPv6 protocol. If
Off*
you want to use the
IPv6 protocol, visit
http://solutions.
brother.com/ for
more information.