Print Quality Difficulties - Brother MFC-7470D Basic User's Manual

Paper handling difficulties (continued)
Difficulties
What paper can I use?
There is a paper jam.

Print quality difficulties

Difficulties
Printed pages are curled.
Printed pages are smeared.
Printouts are too light.
Network difficulties (MFC-7860DN only)
Difficulties
Cannot print over a wired network. If you are having network problems see the Network User's Guide for more
102
Suggestions
You can use thin paper, plain paper, bond paper, recycled paper, envelopes and
labels that are made for laser machines. (For details, see Acceptable paper and
other print media on page 17.)
You can load envelopes from the manual feed slot.
Clear the jammed paper. (See Paper Jams on page 86.)
Suggestions
 Low quality thin or thick paper or not printing on the recommended side of the
paper could cause this problem. Try turning over the stack of paper in the
paper tray.
 Make sure that you choose the Paper Type that suits the print media type you
are using. (See Acceptable paper and other print media on page 17.)
The Paper Type setting may be incorrect for the type of print media you are using,
or the print media may be too thick or have a rough surface. (See Acceptable
paper and other print media on page 17 and Basic tab in the Software User's
Guide.)
 If this problem occurs when making copies or printing received faxes, set
Toner Save mode to Off in the machine menu settings. (See Toner Save in
Chapter 1 of the Advanced User's Guide.)
 Set Toner Save mode to Off in the Advanced tab in the printer driver. (See
Advanced tab in the Software User's Guide.)
Suggestions
information.
Make sure your machine is powered on and is on
the Network Configuration list to see your current network settings. (See Reports
in Chapter 6 of the Advanced User's Guide.) Reconnect the LAN cable to the hub
to verify that the cable and network connections are good. If possible, try
connecting the machine to a different port on your hub using a different cable.
You can check the current wired network status from the Network control panel
menu.
-
line and in Ready mode. Print