Brother HL-3140CW User Manual page 96

General Information
Print Menu (continued)
Submenu Menu Selections
HP LaserJet Font No.
(HL-3170CDW)
Font Pitch
Font Point
Symbol Set
Table Print
Auto LF
Auto CR
Auto WRAP
Auto SKIP
Left Margin
Right Margin
Top Margin
Bottom Margin
The factory settings are shown in Bold with an asterisk.
Options
I000 / ... / I059* / ... / I071
0.44 / ... / 10.00* / ... /
99.99
4.00 / ... / 12.00* / ... /
999.75
PC-8* / PC-8 D/N / ...
-
On / Off*
On / Off*
On / Off*
On* / Off
##
##
#.##
#.##
Descriptions
Sets the font number.
Sets the font pitch.
The Font Pitch menu will appear
when you choose I059 to I071 in
Font No. setting.
Sets the font size.
The Font Point menu will appear
when you choose I000 to I058 in
Font No. setting.
Sets the symbol set or the character
set.
Prints the code table.
If Change Emulation appears on
the LCD, choose Auto or
HP LaserJet in Emulation of the
Print Menu (see page 89).
ON: CR i CR+LF, OFF: CR i CR
ON: LF i LF+CR, FF i FF+CR, or
VT i VT+CR
OFF: LF i LF, FF i FF, or VT i VT
Chooses whether a line feed and
carriage return will happen when the
machine reaches the right margin.
Chooses whether a line feed and
carriage return will happen when the
carriage position reaches the bottom
margin.
Sets the left margin at column 0 to 70
columns at 1 cpi. The default setting
is 0 cpi.
Sets the right margin at column 10 to
80 columns at 1 cpi. The default
setting is 78 cpi (A4).
Sets the top margin at a distance
from the top edge of the paper: 0.00,
0.33, 0.50, 1.00, 1.50 or 2.00 inches.
The default setting is 0.50 inches.
Sets the bottom margin at a distance
from the bottom edge of the paper:
0.00, 0.33, 0.50, 1.00, 1.50 or
2.00 inches. The default setting is
0.50 inches.
3
90