Brother HL-3140CW User Manual page 94

General Information
General Setup
Submenu
Local Language
Ecology
Panel Control
Setting Lock
Reprint
Interface
The factory settings are shown in Bold with an asterisk.
Menu Selections Options
- English* / Français...
0 / 1 / 2 / 3* / 4 / 5 / ... Min
Sleep Time
On / Off*
Toner Save
Off / 1 hour* / 2 hours /
Auto Power Off
4 hours / 8 hours
0.1* / 0.4 / 0.6 / 0.8 /
Button Repeat
1.0 / 1.4 / 1.8 / 2.0 Sec
level1* / level2 / ... /
Message Scroll
Level10
-nnonn+
LCD Contrast
On* / Off
Auto Online
- On / Off*
- On / Off*
Auto* / USB / Network
Select
1 / 2 / 3 / 4 / 5* / ... / 99Sec
Auto IF Time
Level 1 / 2 / 3 / 4* / ... / 7
Input Buffer
Descriptions
Changes the LCD language for your
country.
Sets the time to return to Power
Save mode.
Increases the page yield of the toner
cartridge.
Sets the number of hours that the
machine will remain in Deep Sleep
mode before going into Power Off
mode. Choose Off if you do not
want the machine to go into Power
Off mode.
Sets the time for the LCD message
to change when holding a or b at
intervals.
Sets the time in seconds that an LCD
message will scroll across the LCD.
From Level 1=0.2 sec to Level
10=2.0 sec.
Adjusts the contrast of the LCD.
Sets the machine to return to Ready
mode after it has been idle for 30
seconds. If you choose Off, the
machine cannot receive print jobs if it
has been left in Menu mode.
Turns the lock panel settings On or
Off using the password.
Turns the reprint settings On or Off.
Chooses the interface to use.
If you choose Auto, the machine
automatically changes the interface
to USB or Ethernet depending on
which interface is receiving data.
You must set the time-out period for
the auto interface selection.
Increases or decreases the input
buffer capacity.
3
3
88