Brother HL-3140CW User Manual page 126

Routine Maintenance
Replacing the drum units
IMPORTANT
• While removing the drum unit, handle it carefully because it may contain toner. If toner scatters on your
hands or clothes, immediately wipe or wash it off with cold water.
• Every time you replace the drum unit, clean the inside of the machine (see Cleaning and Checking the
machine on page 139).
When you replace a drum unit with a new one, you must reset the drum counter by completing the following
steps:
a
Make sure that the machine is turned on.
b
Open the top cover until it locks in the open position.
c
Take out the toner cartridge and drum unit assembly for the colour shown on the LCD.
4
4
120