Brother HL-3140CW User Manual page 48

Driver and Software
Colour Calibration
The output density of each colour may vary depending on the temperature and humidity of the environment
the machine is in. This setting helps you to improve colour density by letting the printer driver use the colour
calibration data stored in your machine.
 Use Calibration Data
If you select this check box, the printer driver will use the calibration data retrieved from the machine to set
colour matching in the printer driver. This will ensure consistent print quality.
Get Device Data Automatically

If you select this check box, the printer driver will use the colour calibration data from your machine.
 Start Colour Calibration
If you click this button, your machine will start the colour calibration, and then the printer driver will use the
calibration data from your machine.
Use Reprint
The machine stores the print jobs sent to it in memory. You can reprint the last job without sending the data
again from your computer. For more information about the Reprint function, see Reprinting documents
on page 97.
NOTE
To prevent other people from printing your data using the Reprint function, deselect the Use Reprint
check box.
2
2
2
42