Unpacking And Checking - Iso-Tech IDM 203 RMS Instruction Manual

2. Introduction
These meters are mains or battery-powered measuring and testing instruments for service engineers, laboratory use and
amateur electronics engineers. The functions they can perform are as follows:
Measurement of a.c. and d.c. voltages
Measurement of a.c. and d.c. currents
Measurement of resistance and capacitance
Diode and continuity testing
Frequency and ADP measurement

Unpacking and checking

When you unpack your new multimeter, the items you should have are as follows:
1. Digital multimeter
2. Set of test leads (one black and one red)
3. Operating manual
4. Power cable
5. Carrying strap
5