Function And Control; Remote Control Operations - Vivax ACP-12CH35GEF Service Manual

1 2
3 4
5 6
8
7
1
ON/OFF :
Press this button to start the unit operation. Press this button again to stop the unit operation.
2 MODE :
Each time you press the button,a mode is selected in a sequence that goes from AUTO,COOL,DRY, FAN,and HEAT
as the following:
*Note:Only for models with heating function.
:
-
3
Press this button to decrease set temperature. Holding it down above 2 seconds rapidly decreases set temperature. In
AUTO mode, set temperature is not adjustable.
:
+
4
Press this button to increase set temperature. Holding it down above 2 seconds rapidly increases set temperature. In
AUTO mode, set temperature is not adjustable.
:
5 FAN
This button is used for setting Fan Speed in the sequence that goes from AUTO,
to Auto.
Auto
S p e e d
:
6
SWING
Press this key to activate or deactivate the swing.
ON/OFF
1
Press it to start or stop operation.
MODE
2
Press it to select operation mode(AUTO/COOL/DRY/FAN/HEAT).
-
: Press it to decrease temperature setting.
3
+ : Press it to increase temperature setting.
4
5 FAN
Press it to set fan speed.
SWING
6
Press it set swing angle.
SLEEP
7
8 TIMER
Press it set auto-on/auto-off timer.
AUTO COOL DRY FAN
.
1 S p e e d 2
*
HEAT
Speed 3 S p e e d
to
,
,
4
,
*
,then back