Calibrating The Densitometer - Canon IRC2100 Manual

3
Small connector
AC adapter
T
O CALIBRATE THE

3-7 Calibrating the densitometer

4. Use the AC adapter to provide power.
Plug the small connector on the adapter cable into the side of the X-Rite
DTP32 and plug the adapter into a wall outlet.
5. Turn on the computer.
6. Calibrate the densitometer (see page 3-7).
7. Use ColorWise Pro Tools to calibrate the iR C2100/2100S (see page 3-8).
Calibrating the densitometer
You will need the black-and-white X-Rite Auto-Cal Strip included with the
densitometer. Calibrating the densitometer does not require
ColorWise Pro Tools.
X-R DTP32:
ITE
1. Connect the densitometer to the computer and supply power (see page 3-5).
2. From the Main Menu on the X-Rite DTP32 display, press the p1 key once to
reach p2.
3. Press the cal key.
Calibrating motor speed
STRIP .
is displayed, followed by the words
INSERT CAL