Table of Contents
Advertisement
3
3-10 Color Calibration
3. Select a measurement method.
ReaderCal (copier only) and X-Rite DTP32 should appear as the
measurement methods. This information is provided to Calibrator by the
iR C2100/2100S. If neither option appears, make sure you are connected to
the iR C2100/2100S.
4. Under Check Print Settings, choose the desired calibration set.
Choose the appropriate calibration set you will use most often.
For this calibration to take effect, the calibration set must be associated
N
:
OTE
with one or more output profiles. The default calibration set is already
associated with the default output profile, so there is no need to make any
new associations.
5. Under Generate Measurement Page, click Print.
6. In the Print Options dialog box that appears, choose the page type, paper
size, and input tray to use for the measurement page and click Print.
For ReaderCal, the Page Type pop-up menu states ReaderCal Page. For the
densitometer method, select either 34 or 21 Sorted Patches.
Advertisement
Table of Contents
