Table of Contents
Advertisement
3
3-12 Color Calibration
9. If you chose the densitometer method, select the Page Type and Paper Size
options you selected for the measurements page, and click Measure.
Then follow the directions in the dialog box that appears for feeding the
measurement page through the X-Rite DTP32.
The Status field displays instructions for selecting the port and feeding the
measurement page through the DTP32 four times, once for each color strip.
10. When the Status field indicates that the measurements were read
successfully, click Accept.
11. In the Measure dialog box, click OK.
12. In the Calibrator window, click Apply to implement the new calibration set.
13. In the Information dialog box, click OK.
This completes the calibration process.
Advertisement
Table of Contents
