Download  Print this page

Sanyo DC-MCR300 Instruction Manual page 7

Hide thumbs

Advertisement

Use compact discs bearing the symbol shown. In
addition to conventional 12 cm CDs, this system
can be used to play 8 cm CDs without an adapter.
-
This unit can play back the CD-R/RW that
have recorded music data as well. However, some CD-R/RWs
can not be played back depending on the recording conditions.
-
The CD-R/RW can't be recorded in this unit.
Preparations
1. Press the FUNCTION button on the remote control to select "CD"
function.
2. Press the DOOR OPEN/CLOSE button on the main unit. "OPEN"
appears and the top compartment opens.
3. Place the disc with the label facing up on the disc tray. (Place only
one disc at a time.)
4. Press the DOOR OPEN/CLOSE button again, "CLOSE" display
briefly. The top compartment is closed. "READING" appears, then
the total number of tracks and total playing time on the disc ap-
pear on the display.
Starting play
Normal playback
1. Press the i button. Play starts from the first track.
When using the main unit, use the CD i button.
-
Example:
REPEAT ALL
FOLDER
PROG.RANDOM
POP
CLASSIC
ROCK
JAZZ
Track number Elapsed playing time
Note:
If "NO DISC" appears, load the disc.
-
If the disc is loaded with the label side downward, or if a badly
scratched disc is loaded, "NO DISC" or "UNDISC" appears on
the display. If this occurs, load the disc correctly or replace the
disc.
2. Press the n button to end disc play.
When using the main unit, use the n button.
-
When the last track has been played, the player stops
automatically.
Temporarily stopping play
Press the i button. "
" blinks and elapsed playing time on the
display. To resume play, press the button again.
When using the main unit, use the CD i button.
-
Track skip
Skipping forward
Press the e button briefly during play to skip to the next track. A track
is skipped each time the button is pressed.
Skipping back
Press the f button briefly during play to skip back to the beginning
of the track currently play. Press the button again immediately to skip
back to the beginning of the previous track.
FILE
TR
CH
MP3
VCD
PBC
RDS
REC
SLEEP
ST
BASS
0
ON OFF
X
MHz
b a
kHz
CD PLAY
Repeat play
Press the REPEAT button (or the CD REPEAT button on the unit)
before or during play. The player will play all the tracks or all the
programmed tracks repeatedly. "REPEAT" appears on the display. To
cancel repeat play, press the button again. "REPEAT" disappears.
Random play (Remote control only)
Press the CD RANDOM button before or during play. The player will
automatically select and play track on the disc at random.
Press the n button to stop playing, then press the CD RANDOM button
to cancel random play. "RANDOM" disappears.
-
Random play will not function during programme play.
Programmed play
Up to 40 tracks on a disc can be programmed for play in any order.
-
First, select "CD " function and load a disc that you want to
programme.
-
The tracks must be programmed in the stop mode.
-
The same track can be programmed more than once.
1. Press the MEMORY button.
2. Press the number button(s) (or e or f button) to select a
track.
3. Press the MEMORY button.
4. Repeat steps 2 - 3 to programme additional tracks.
5. Press the i button to start programmed play.
When all programmed tracks have played, the player stops
automatically.
-
The programme contents are retained in memory.
Note:
-
Any attempt to programme more than 40 tracks will result in "FULL"
being displayed and discontinuation of the programming.
To cancel programmed play, press the n button twice.
-
Checking the programme
Each time the MEMORY button is pressed in the stop mode, the
programmed details sequentially appear.
Changing a programme
To add a new track to a programme:
1. In the stop mode, press the MEMORY button repeatedly until "0"
appears on the track number section.
2. Select a track as explained above, then press the MEMORY button.
To change a track:
1. In the stop mode, press the MEMORY button repeatedly until the
track number to be replaced is displayed.
2. Select a track as explained above, then press the MEMORY button.
Note:
Programmed details cannot be partially deleted or inserted.
-6-
REPEAT ALL
FOLDER
FILE
TR
CH
MP3
VCD
PBC
RDS
REC
SLEEP
RANDOM
PROG.
ST
BASS
POP
POP
0
ON OFF
CLASSIC
CLASSIC
MHz
ROCK
ROCK
JAZZ
JAZZ
kHz
b a
REPEAT ALL
FOLDER
FILE
TR
CH
MP3
VCD
PBC
RDS
REC
SLEEP
RANDOM
PROG.
ST
BASS
POP
POP
0
ON OFF
CLASSIC
CLASSIC
MHz
ROCK
ROCK
JAZZ
kHz
b a
JAZZ
REPEAT ALL
FOLDER
FILE
TR
CH
MP3
VCD
PBC
RDS
REC
SLEEP
RANDOM
PROG.
ST
BASS
POP
POP
0
ON OFF
CLASSIC
CLASSIC
MHz
ROCK
ROCK
kHz
b a
JAZZ
JAZZ

Advertisement

loading

  Also See for Sanyo DC-MCR300