Sanyo DC-MCR60 Instruction Manual
Hide thumbs Also See for DC-MCR60:

Advertisement

INSTRUCTION MANUAL
DC-MCR60
Micro Component System

Advertisement

Table of Contents
loading

Summary of Contents for Sanyo DC-MCR60

  • Page 1 INSTRUCTION MANUAL DC-MCR60 Micro Component System...
  • Page 2 PRECAUTIONS CAUTION – INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM. ADVARSEL – USYNLIG LASER STRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION, UNDGÅ UDS ÆTTELSE FOR STRÅLING. VARNING – OSYNLIG LASER STRÅLNING NÄR DENNA DEL ÄR ÖPPNAD CAUTION - USE OF CONTROLS OR ADJUSTMENTS OCH SPÄRR ÄR URKOPPLAD.
  • Page 3 Note: Unwind the aerial wires, then connect Do not connect the mains lead to an AC outlet until all connec- them to the AM LOOP terminals. Place tions have been made. the loop aerial in a position which The system is not completely disconnected from the mains when yields the best AM reception, or attach the z/ON button is set to the z position.
  • Page 4: Remote Control

    REMOTE CONTROL Controls 1. Power button (z/ON) 2. Sleep button (SLEEP) 3. Sound preset button (SOUND PRESET) 4. Preset tuning (TU PRESET) 5. Volume buttons (VOL -, VOL +) 6. Memory button (MEMORY) 7. Number buttons (1-9, 0) 8. Tuner function/Band select button (TUNER/BAND) 9.
  • Page 5: Adjusting The Clock

    ADJUSTING THE CLOCK (Main unit only) Example: To set “PM 6:30”, 6. Press the MEMORY button. First, press the z/ON button to turn the power off. Only the clock dis- The cock starts. play appears. 1. Press the CLOCK/TIMER button The time can be set accurately by pressing the MEMORY but- for at least 2 seconds, “0”...
  • Page 6: Programmed Play

    CD PLAY Use compact discs bearing the symbol shown. The number buttons on the remote control can also be used for In addition to conventional 12 cm CDs, this skip play. To skip to track 6 while one track is playing, press 0, system can be used to play 8 cm CDs without then 6.
  • Page 7: Listening To Tapes

    LISTENING TO TAPES 1. Press the FUNCTION button to select “TAPE”. 5. Press the PLAY button to begin playback. 6. Press the STOP/EJECT button to stop playback at any time. Press 2. Push the cassette button lid backward to reveal the cassette buttons. it again to remove the cassette.
  • Page 8: Timer Operation

    . is pressed, press the TUNING + button at the same time to select bc- SANYO does not approve of, and cannot be held responsible for, 1 or bc-2. Select the setting that gives the best result.
  • Page 9: Maintenance

    MAINTENANCE Cleaning the tape heads Cleaning the CD player lens To ensure continued high performance, use cotton swab to clean the The lens should never be touched. If dust is on the lens, blow it off heads, pinch roller and capstan of the decks after about every 10 using a camera lens blower.
  • Page 10: Specifications

    Dimensions: Signal-to-noise ratio: 123(W) x 232(H) x 202(D) mm 40 dB Weight: Wow/flutter: 850g (per speaker) 0.15% (WRMS) Fast forward/rewind time: Specifications subject to change without notice. Approx. 110 sec. (C-60) SANYO Electric Co., Ltd. (AU) 1AD6P1P1925-E Printed in China...

Table of Contents