Table 18 Wireless: Static WEP (continued)
LABEL
WEP Key
Back
Apply
Cancel
6.3.3 WPA-PSK/WPA2-PSK
Click Advanced Setup > Wireless LAN > Wireless to display the Wireless screen. Select
WPA-PSK or WPA2-PSK from the Security Mode list.
Figure 24 Wireless: WPA-PSK/
P-660W-Tx v2 User's Guide
DESCRIPTION
The WEP Key is used to encrypt data. Both the ZyXEL Device and other wireless
devices on your network must use the same WEP key.
If you want to manually set the WEP keys, type the key in this field. The length of
the key corresponds to the security strength.
For 64-bit security, type 5 ASCII characters or 10 hexadecimal characters ("0-9", "A-
F").
For 128-bit security, type 13 ASCII characters or 26 hexadecimal characters ("0-9",
"A-F").
Click Back to go to the main wireless LAN setup screen.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
Chapter 6 Wireless LAN
69