Configuring Firewall Rules - ZyXEL Communications P-660W-Tx User Manual

Chapter 11 Firewall Configuration
Table 39 Rule Summary (continued)
LABEL
Schedule
Log
Alert
Insert/Append
Move
Back
Apply
Cancel

11.4.1 Configuring Firewall Rules

Follow these directions to create a new rule.
1 In the Rule Summary screen, type the index number for where you want to put the rule.
For example, if you type "6", your new rule becomes number 6 and the previous rule 6
(if there is one) becomes rule 7.
2 Click Insert to display this screen and refer to the following table for information on the
labels.
118
DESCRIPTION
This field tells you whether a schedule is specified (Yes) or not (No).
This field shows you whether a log is created when packets match this rule
(Enabled) or not (Disable).
This field tells you whether this rule generates an alert (Yes) or not (No) when the
rule is matched.
Type the index number for where you want to put a rule. For example, if you type "6",
your new rule becomes number 6 and the previous rule 6 (if there is one) becomes
rule 7.
Click Insert to add a new firewall rule before the specified index number.
Click Append to add a new firewall rule after the specified index number.
Type a rule's index number and the number for where you want to put that rule. Click
Move to move the rule to the number that you typed. The ordering of your rules is
important as they are applied in order of their numbering.
Click Back to return to the previous screen.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to begin configuring this screen afresh.
P-660W-Tx v2 User's Guide