Advertisement
Quick Start Guide
6. Splitter/ Micro-filter Connection
The Splitter / Micro-filter are important for ADSL installation, they help direct
high-frequency signals to the ADSL modem & low frequency signals to the
telephone or other analogue device to prevent inter-modulation distortion & get
good speed/stable ADSL sync rate.
a) Splitter connection
If the installation has only a single telephone and a single ADSL modem, then a
splitter can be employed.
b) Micro-filter connection
If the installation has several telephones or other analog devices, then an internal
micro-filter can be employed at each analog device.
E
a
s
y
S
i
g
n
-
O
E
a
s
y
S
i
g
n
-
O
Make sure that device is powered on, Ethernet cable is connected to your PC and ADSL line is
in sync. Then open up a web browser and you will automatically be directed to the step-by-step
easy sign on configuration wizard which will guide you to complete the basic network
configuration to connect to the internet.
C
o
n
n
e
c
t
i
n
g
C
o
n
n
e
c
t
i
n
g
1. Open the web browser and type http://192.168.1.254 in the browser's address box. This
number is the default IP address for this router. Press Enter.
2. A username and password window will appear. The default username is "admin", and
password is "admin". Press OK to proceed.
3. You will get a status report web page and main menu screen.
n
n
t
o
t
h
e
R
o
u
t
e
t
o
t
h
e
R
o
u
t
e
r
r
6-
-
Advertisement
