Barco FLX-60 Installation Manual page 32

3. Components of an FLX display system
BARCO FLX ► HUBs
BARCO FLX
HUB OUT 1
Address: 12
BARCO FLX ► HUBs ► Patterns
BARCO FLX
HUBs
Patterns
Address: 12
BARCO FLX ► HUBs ► Patterns
BARCO FLX
HUBs
Patterns
Address: 12
BARCO FLX ► HUBs ► Info
HUB OUT 1 Info
S/N: 123456789
Versions:
Software: 01.00.0
Firmware: 01.00.0
Pixel type: FLX-60
Pixels: 256,128,128,64,64,64,64,4
BARCO FLX ► HUBs ► Power off
BARCO FLX
HUBs
Power off
Address: 12
BARCO FLX ► HUBs ► Power on
BARCO FLX
HUBs
Power on
Address: 12
Other important popup messages
! BACKUP FIRMWARE !
28
► Next HUB
Previous HUB
Patterns
Info
Power off HUBs
Back
► Pattern off
Red
Green
Blue
White
String colors
Running pattern
White
String colors
Running pattern
Running pixel
Flying pixel
► Back
Backup: 01.00.0
Backup: 01.00.0
POWER OFF
ALL HUBS
► Yes
Back
POWER ON
ALL HUBS
► Yes
Back
Via this menu you can select one of the connected FLX-HUB units
to set a local pattern or retrieve information. Furthermore, an
option is provided to switch the power of all connected FLX-HUB
units on or off.
This menu allows you to activate one of the local test patterns for
the connected FLX-HUB units.
The arrow ▼, in the lower right corner, which is pointing
downwards indicates that the list is longer than the LCD display.
Use the navigation buttons to scroll down to see the next items in
▼
the list. An arrow ▲ in the upper right corner will appear.
▲ The last item in the list is 'Back' which can be used to go to the
previous menu.
Note that the Patterns menu does not automatically return to the
root menu after 30 seconds of inactivity.
This menu displays information about the selected FLX-HUB
such as serial number, software/firmware versions, connected
pixel type and the number of pixels connected per FLX-HUB
output port.
This option allows you to switch off the power of all FLX-HUB
units connected with this FLX-NNI Controller.
This option allows you to switch on the power of all FLX-HUB
units connected with this FLX-NNI Controller.
This message appears in case the FLX-NNI Controller unit runs
with backup firmware. This means that the main firmware is
corrupt and should be updated. Updating the firmware of the
FLX-NNI Controller unit has to be done with the Director toolset.
See user guide of the Director toolset for detailed instructions.
Note that the functionality of an FLX-NNI Controller unit which
runs with backup firmware is almost completely disabled. Only
the firmware can be updated.
R59770419 FLX-60 12/05/2010