Mounting The Fixed Bracket On The Flx-Hub - Barco FLX-60 Installation Manual

4. Installation procedures
4.9 Mounting the fixed bracket on the FLX-HUB
Necessary tools
PH1 Phillips screwdriver.
Necessary parts
• Four M3x10 cross recessed pan head screws, stainless steel (DIN7985).
• Four single coil spring washers, D3.1 - D6.2 (DIN127B).
How to install the fixed bracket on the FLX-HUB?
1. Place the fixed bracket into position as illustrated and fasten with four screws. Use a PH1 Phillips screwdriver the fasten the
screws (reference 1). Make sure that each screw is provided with a spring washer (reference 2).
Image 4-15
56
2
1
R59770419 FLX-60 12/05/2010