Advertisement
7
Install software
Note:
If your computer does not have a CD/DVD drive, you can
download the software from the Epson website. (See "Epson technical
support" on this sheet).
Caution:
Be sure to close your other programs, including any screen
savers and virus protection software, before beginning this software
installation.
1
Make sure the printer is NOT CONNECTED to your
computer.
Windows
:
If you see a Found New Hardware screen, click
®
Cancel and disconnect the USB cable. You can't install your
software that way.
2
Insert your product CD.
3
Windows: If you see the AutoPlay window, click Run
Setup.exe. If you see the User Account Control screen,
click Yes or Continue.
Mac OS X: Double-click the
4
Select your language, if necessary.
5
In Windows, accept the license agreement, then click
Install. In Mac OS X, click Continue. Then follow the
instructions on your computer screen.
6
When you see the following screen, check the "Connection
options" section on this sheet for more information.
Choose your connection. Then click Next (Windows) or
Continue (Mac OS X) and follow the instructions on your
computer screen.
EPSON icon.
Connection options
Wireless connection
You must install the software on every computer from which
you want to print. For the first installation, we recommend
using a USB cable (not included) to simplify wireless setup.
After the printer is connected to the network, you will be
prompted to remove the cable.
If you're using Mac OS X 10.6, 10.7, or 10.8, or you don't
have a USB cable, you will need to use the buttons on the
printer to select wireless settings. Follow the instructions on
your computer screen during software installation; they will
explain how to connect the printer wirelessly this way.
Make sure you know your network name (SSID) and network
password:
• Network name
• Network password
If you don't have this information, contact the person who set
up your network.
Direct USB connection
Make sure you have a USB cable (not included).
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
• Make sure you select the right network name (SSID).
• If you see a firewall alert message, click Unblock or Allow
to let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. If it has uppercase (ABC) or lowercase (abc)
letters, make sure you enter them correctly.
Repeatedly press the numeric keypad buttons as
necessary to select uppercase letters (ABC), lowercase
letters (abc), or numbers and symbols (123).
Press
to move to the next character.
Press
to delete.
Press the OK button when you're finished entering your
password.
You see error messages on the printer's LCD
screen.
See your on-screen User's Guide for troubleshooting
information.
Advertisement
