Table of Contents
Advertisement
Set the Time & Date
The clock and calendar are utilized to time stamp history records and other
data, so it is important to set the time and date soon after you power on the
display unit.
Set the Time
1. Press the "
2. Press the "
3. Press the "
V
4. Press the "
5. Press the "
6. Press the "
V
The clock is now set.
Set the Date
Note: The " " stays in
Selectable Categories,
1. Press the "
even after setup.
2. Press the "
3. Press the "
4. Press the "
V
5. Press the "
6. Press the "
7. Press the "
V
8. Press the "
The date is now set.
" or "
" buttons until "SET
V
CLOCK?" is displayed on the Selectable
Category part of the display unit.
" button to set the clock.
" or "
" buttons to adjust the
V
hour. Note the "AM" and "PM" indicators.
" button to confirm hour
selection.
" or "
" buttons to adjust
V
minutes.
" button to confirm minute
selection.
" or "
" buttons until "SET
V
DATE?" is displayed on the Selectable
Category part of the display unit.
" button to set the date.
" or "
" buttons to adjust the
V
month.
" button to confirm month
selection.
" or "
" buttonsto adjust the
V
day.
" button to confirm day
selection.
" or "
" buttons to adjust the
V
year.
" button to confirm year
selection.
8
reached. Alarms include: outdoor temperature, outdoor humidity, wind
speed, heat index, dew point, wind chill, indoor temperature and indoor
humidity.
The rain alarm does not require a preset numerical value, but instead
sounds as soon as rain is recorded. Similarly, the storm alarm sounds when
a large atmospheric pressure drop occurs, which usually indicates an
oncoming storm.
Note: The storm alarm is NOT intended to be a safety device or
warning system.
Set a Weather Alarm
1. Choose the weather category for which you wish to set an alarm by
pressing the "
" or "
" buttons until the category is displayed on the
V
Selectable Category part of the display unit.
2. To program a value (only applies to alarms that require a value), press
AND HOLD the "
" button until the "SET" indicator appears in the
area of the display labeled "ALARM" (left of the selected weather
category) and the alarm setting flashes.
3. Adjust the alarm value by pressing the "
4. Press the "
" button to confirm a value.
5. Next, press the "
" button to activate the alarm. The alarm ON
indicator will highlight on the display.
Alarm is now programmed and turned on.
V
To set or adjust an alarm value:
Press and hold "
To activate or deactivate an alarm:
Press "
"
Silence a Sounding Alarm
The alarm sounds initially for a few minutes, then silences itself. The alarm then
sounds every few minutes afterwards until one of the following happens:
1. "SNOOZE" - Press any button. Alarm silences, but sounds again if the alarm
condition reoccurs.
2. Turn the alarm "OFF" - Deactivates the alarm.
" or "
" buttons.
V
"
13
Advertisement
Table of Contents
