Features & Benefits - ACU-RITE 1502 Instruction Manual

Specifications
Outdoor: -40ºF to 158ºF; -40ºC to 70ºC
TEMPERATURE RANGE
Indoor: 32ºF to 122ºF; 0ºC to 50ºC
Outdoor: 1% to 99%
HUMIDITY RANGE
Indoor: 16% to 98%
0 to 99 mph; 0 to 159 kph
WIND SPEED
WIND DIRECTION
16 points
INDICATORS
0 to 393 in; 0 to 9999 mm
RAINFALL
330ft / 100m
WIRELESS RANGE
433mhz
OPERATING FREQUENCY
Display: 3 x AA alkaline batteries
POWER
Sensor: 4 x AA alkaline or lithium batteries
Wind Speed: 18 seconds; Direction: 30 seconds
DATA REPORTING
Outdoor temperature & humidity: 36 sec. updates
Indoor temperature & humidity: 60 sec. updates
FCC Information
This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to
this equipment. Such modifications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of
the device.
depending on home construction materials
18
Features & Benefits
1
11
6
5-IN-1 SENSOR
1. Rainfall Collector Funnel
2. Solar Cell Panel
Converts sunlight into power to run
internal aspirating fan.
Internal Aspirating Fan (not
shown)
Draws ambient air into sensor to
reduce solar radiation heating,
resulting in more accurate
temperature measurement.
3. A-B-C Switch
ID code that must match displayʼs
A-B-C switch to ensure units
synchronize.
4. Battery Compartment
7
2
3 4 5
8
10
5. Temperature & Humidity Sensors
(internal)
6. Mounting Point
7. Wind Speed Anemometer
8. Wind Direction Vane
9. Mounting Bracket
10. Mounting Hardware
Includes anchors and screws.
Qty Diameter Length
5 #4 (3/4")19.05 mm
1 #4 (1/2") 12.7 mm
1 #6 (1/2") 12.7 mm
11. Debris filter
Snaps into rain collector to filter out
twigs, leaves, etc.
3
9