TRANSPORTING
LOADING
1.Track type: Step on the foot pedal, and raise the auger to the HIGH
2.Start the engine (see page 21) and maneuver the snowblower
backward into line with the loading ramp.
3.Track type: Run the snowblower backward slowly up the loading
Wheel type: Push down the handles to raise the auger and run the
Be careful to avoid striking the chute or other parts of the machine.
DOWN
UP
4.After the snowblower is in the truck, stop the engine, and turn the
fuel valve to the OFF position. This will prevent the possibility of
carburetor flooding and will reduce the possibility of fuel leakage.
5.Tie the snowblower down with rope or straps, and block the treads.
Keep the tie-down rope or straps away from controls and cables.
60
position (see page 14).
ramp.
snowblower up the loading ramp.
BACKWARD
L
5 ft (1.5 m)
minimum headroom
H