Honda HS928 Owner's Manual page 26

OPERATION
b. Turn the engine switch to the
ON position.
c. Push the starter button until
the engine starts. After the
engine starts, disconnect the
power cord from the electrical
outlet, and then from the
switch box.
Do not operate the starter for more than 1 minute. If the engine
fails to start, release the button and allow the starter to cool for
15 minutes before operating it again.
Manual Starting only
a. Turn the engine switch to the
ON position.
b. Pull the starter grip lightly
until you feel resistance, then
pull briskly in the direction of
the arrow as shown.
c. Return the starter grip gently
to the engine.
• Do not allow the starter grip to snap back against the engine. Return
it gently to prevent damage to the starter.
• Do not pull the starter grip while the engine is running. The starter
could be damaged.
24
ON
ENGINE SWITCH
STARTER GRIP
Direction to pull
PUSH