HP ENVY x360 Convertible PC Maintenance And Service Manual page 64

e. Remove the display/webcam cable (4).
5. To remove the display panel from the bezel:
NOTE:
and 774603-001 for FHD panels.
a. Position the display bezel/display panel assembly upside-down.
b. If necessary, disconnect the display/webcam cable from the connector at the bottom of the
display panel (1).
c. Remove the four Phillips PM2.0×3.0 screws (2) that secure the display panel to the display
enclosure.
d. Remove the display panel from the bezel (3).
6. The display hinges are located in the display enclosure. To remove the display hinges:
NOTE:
56 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
The display panel and bezel are available using spare part number 774602-001 for HD panels
The display hinges are available using spare part number 774596-001.