5.
Disconnect the battery.
6.
Remove the WLAN module (see
7.
Remove the system board (see
Remove the memory module:
1.
Position the system board upside-down.
2.
Spread the retaining tabs (1) on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
3.
Remove the memory module (2) by pulling the module away from the slot at an angle.
Reverse this procedure to install a memory module.
50
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
WLAN module on page
38).
System board on page
47).