Table of Contents
Advertisement
WINDOWS Installation: HP A7173A PCI-X Dual Channel Ultra320 SCSI Host Bus Adapter
Updating all of your SCSI adapters with the latest driver
If "Host SCSI ID" is selected and the +/- keys are pressed, you will have the option to change the
SCSI ID of the SCSI controller (the default value of 7 should be used, unless the SCSI adapter is in
a multi-initiator configuration.
If "Secondary Cluster Server" is selected and the +/- keys are pressed, you will have the option to
change the secondary cluster server setting to Yes or No (the default setting "No" should be used
unless an attached device is shared with other SCSI adapters.
If configuration problems are encountered, refer to the HP Support site at
http://www.hp.com/support/itaniumservers by searching or selecting a product.
Updating all of your SCSI adapters with the latest driver
There are two methods for updating all of your SCSI adapters with the latest driver:
•
install the Integrity Support Pack
(this runs multiple Smart Components, updating the drivers for multiple devices)
•
install the individual Smart Component
(updating the drivers for your SCSI adapters only)
With either method you can find the necessary files and drivers on the Smart Setup DVD that shipped with
your server, or on the web at: http://www.hp.com/support/itaniumservers/.
Method 1: Installing the Integrity Support Pack
Step 1. Insert the HP Smart Setup DVD in the DVD-ROM drive.
Step 2. Click Agree at the End User License Agreement screen.
Step 3. Click the Install Support Pack tab in the Smart Setup screen.
Step 4. Click the Install ISP link to continue.
Step 5. Click Open in the File Download screen to launch the HP Remote Deployment Utility and begin
the installation process.
Method 2: Installing the Smart Component only
Step 1. Insert the HP Smart Setup DVD in the DVD-ROM drive.
Step 2. Click Agree at the End User License Agreement screen.
Step 3. Click the Access Software tab in the Smart Setup screen, and then the Access Software button
to continue.
Step 4. In the Software and Drivers screen, click on your Integrity server model number.
Step 5. In the Drivers section of the next screen, click Driver for U320 SCSI Controller (Windows
Server 2003 64-Bit).
Step 6. In the Driver for U320 SCSI Controller screen, click Download.
Step 7. In the File Download screen, click Open.
28
Chapter 4
Advertisement
Table of Contents
