Updating Individual Scsi Adapters With The Latest Driver - HP A7173A Installation Manual

Step 8. In the HP Package Setup screen, click Install to begin the installation.
Step 9. Reboot if requested.

Updating individual SCSI adapters with the latest driver

Use this method to update the drivers for individual adapters only:
Step 1. Insert the HP Smart Setup DVD in the DVD-ROM drive.
Step 2. Click Agree at the End User License Agreement screen.
Step 3. Click the Access Software tab in the Smart Setup screen, and then the Access Software button
to continue.
Step 4. In the Software and Drivers screen, click on your Integrity server model number.
Step 5. In the Drivers section of the next screen, click Driver for U320 SCSI Controller (Windows
Server 2003 64-Bit).
Step 6. In the Driver for U320 SCSI Controller screen, click Download.
Step 7. In the File Download screen, click Open.
Step 8. In the HP Package Setup screen, click Extract.
Step 9. Select the folder where you want the driver installation files copied to, and click OK.
Step 10. Next, run the Windows Device Manager (Start > Settings> Control Panel, double-click System
icon, select Hardware tab, and click Device Manager).
Step 11. Navigate to the desired device in the Device Manager list and update the driver manually ("install
from list") by pointing it to the folder where the files were copied to in Step 9. Select the file named
symmpi.inf to begin the installation.
Step 12. When the installation finishes, reboot the system.
Step 13. You can verify successful installation by re-opening the Device Manager and checking the MiniPort
driver version number.
This procedure updates one channel on one adapter only. If you want to update more channels or more devices
you must repeat these steps for each one.
Chapter 4
WINDOWS Installation: HP A7173A PCI-X Dual Channel Ultra320 SCSI Host Bus Adapter
Updating individual SCSI adapters with the latest driver
29