Table of Contents
Advertisement
8. MENU SETTINGS
After electrical installation and start-up, both the connected devices and the keyboard itself have to be
set up.
Hold the Shift key and press the Menu key to enter the keyboard menu.
COM Port Setting
Device Setting
Use the joystick and the Enter key for menu navigation. Use the Esc key to leave the menu and return
from submenus.
The "<" icon at the end of the second line indicated further settings to be effected in this menu. Use the
joystick
to switch between the lines.
Selected settings are displayed blinking. Press Enter to confirm the setting and Esc to return to the
previous menu level.
8.1. Menu structure
The LCD display menu shows the following structure:
COM Port Setting
Device Setting
Keyboard setting
Monitor Setting
Camera Setting
Monitor Setting
DVR Setting
Camera List & Delete
Monitor List & Delete
DVR List & Delete
Non-listed Device
Sub Keyboard Setting
MENU Password
Lock Password
Alarm Password
Buzzer ON/OFF
Joystick Calibration
Keypad Test
Jog & Shuttle Test
Load default setting
Firmware update
14
Advertisement
Table of Contents
