Autopan; Frame Scan / Preset Tour - EverFocus EKB500 User Manual

9.2.3.3. Autopan

End stop definition
Define both the end stops and the autopan speed in the speed dome's on-screen display. For further
details, please refer to the manual of the respective model.
Activate A-B autopan
A.Pan > enter pan speed 1~ 239
> Enter
Activate 360° autopan
A continuous 360° pan operation is also possible.
Shift (hold) + A.Pan
> enter pan speed 1~ 239 >ENTER
ATTENTION: At some third party domes with implemented Pelco-D the Autopan starts with alternative
command:
POSITION > 99 > Enter

9.2.3.4. Frame Scan / Preset tour

Frame scan is a modified Autopan mode, the Autopan stops at defined positions for a programmed time.
Settings for this are defined in the speed dome OSD manual. At some third party domes with
implemented Pelco-D protocol this command starts Preset tour.
Start Framescan
POSITION > 98 > Enter
Speed:___[1-239]
[ENT] to start.
Speed:___[1-239]
[ENT] to start.
34