Table of Contents
Advertisement
3.4.1 Menu Operation
There are two ways to operate the menu options: Use the Joystick or Use the Keys. Please note that
when Joystick and Keys are being operated at the same time, the control goes to Joystick.
Joystick Operation:
•
Push the joystick up or down to flip the menu.
•
Push the joystick left or right to select among the parameters and then press the 【Enter】 key to
confirm setting.
•
Rotating the joystick to any direction can exit the current setup page except the 【Menu】 page.
•
When entering the OSD menu on the LCD screen, the joystick can only be used to operate the
OSD menu and cannot be used to control the actions of speed dome camera.
Key Operation:
•
Press [2] or [8] to flip the menu; Press [4] or [6] to select among the parameters.
•
Press the 【Enter】 key to confirm and save changes each time when setting up a function.
•
When entering the OSD menu on the LCD screen, the number keys [0], [1], [3], [5], [7], [9] will be
invalid. The [2], [8], [4], [6] keys can only be used to operate the OSD menu as up, down, left and
right keys.
•
When entering the address page, the [2], [8], [4], [6] keys can only be used as number keys.
•
The [2], [8], [4], [6] keys can be used as joystick to control the direction (up, down, left and right)
of the speed dome camera only when:
1) Exiting the OSD menu on the LCD screen.
2) The second line on LCD screen shows blank (Figure 3.4.1.1), the number keys [2], [8], [4] and
[6] can be used as joystick to control the direction (up, down, left and right) of the speed
dome camera. The rotation speed is fixed to fastest and cannot be adjusted (Figure 3.4.1.2).
PELCO-D 2400 000
Figure 3.4.1.1
PELCO-D 2400 000
PT->UP
Figure 3.4.1.2
5
EKB700 Keyboard
Advertisement
Table of Contents
