Table of Contents
Advertisement
9.2.2. EverFocus ED 2200/2250, Pelco-P, Samsung El. SCC-641/643/6405 operation
Required protocol type in "COM PORT SETTINGS": A-TYPE / SAMSUNG /Pelco-P
9.2.2.1. On-screen display
Start menu:
Switch between the settings:
Change the settings:
Leave the menu:
9.2.2.2. Presets
Preset parameters are defined in the dome menu. Please refer to the manual of the respective model.
Save presets
Shift (hold) + POSITION
> enter preset number > Enter
Delete preset
Clr (hold) + POSITION
> enter preset number > Enter
Start preset
POSITION > enter preset number > Enter
9.2.2.3. Home position
The home position is the position (preset) which is approached after a pre-defined duration upon last
speed dome operation.
Define the home position within the speed dome's on-screen display. For further details, please refer to
the manual of the respective model.
The manual home position start is effected by starting the preset programmed for this function in the
dome menu.
The HOME key is inactive.
MENU
Shift (hold) + JOYSTICK
Shift (hold) + JOYSTICK
Clr (hold) + MENU
Camera:0001 Save to
Position:___[1-192]
Camera:0001
Del Position:___
Camera:0001 go to
Position:___[1-192]
31
Advertisement
Table of Contents
