Main Monitor (Main) Operation In Dvr Mode; Call And Matrix Monitor Operation In Cam-Mon Mode - EverFocus EKB500 User Manual

Universal for both dvr remote control and telemetry control of speed domes and telemetry receivers

Hide thumbs Also See for EKB500:

Table of Contents

9.1.3. Main monitor (MAIN) operation in DVR mode

The camera and monitor definition within the keyboard menu is irrelevant for the main monitor (MAIN)

operation.

As the operation is effected in DVR mode, CAM resp. MON switching is not necessary.

Select the camera by entering the channel number (DVR video input) via the numeric keypad. Key 1 is

delayed for approx. 1 second to enable input of channels 10~16.

All display options available for the respective DVR type are recallable through the keyboard (OSD, multi

screen displays).

ATTENTION: An additional camera switching by pressing CAM > camera number > Enter is required

for camera pan / tilt / zoom control.

ATTENTION: The call and matrix monitor operation requires the definition of monitors and cameras

controlled by this keyboard in the keyboard menu. The keyboard only accepts camera-monitor

combinations connected to one digital video recorder.

Camera switching from active DVR mode

Press the CAM key, camera number is blinking.

Enter the camera number and press Enter to confirm.

Enter the monitor number and press MON for

Monitor selection.

Camera switching is effected.

Camera switching in active CAM-MON mode

If the keyboard already works in CAM-MON mode, a simplified operation is possible:

Syntax:

Camera number > CAM

Monitor number > MON

If the active camera (indicated in the display) shall also be displayed on other monitors, only the monitor

must be entered:

Monitor number > MON

CAM : 0001

[ CAM / MON / DVR ]

MON : 0001

Table of Contents