Preset Tours - EverFocus EKB500 User Manual

9.2.1.5. Preset tours

The EPTZ series supports up to 16 programmable preset tours with up to 16 presets each.
For these tours, 2 operation modes are available:
1) Mode 1 (One way): after approaching all programmed presets, the tour restarts at the first
programmed preset.
Example: 1-2-3-4-5-6 > 1-2-3-4-5-6 > 1-2-3-4-5-....
2) Mode 2 (back and forth) > after approaching all programmed presets, the speed dome returns to the
presets in reverse order.
Example: 1-2-3-4-5-6 > 5-4-3-2-1 > 2-3-4-5-6 > 5-.....
Preset tour programming
Set (hold) + Tour
> enter tour number 0, 1 ~ 16 > Enter
Enter the presets in correct order (max. 16).
Press Enter to save and add further preset tours.
Press Stop to finish preset tour programming.
By entering 0 as tour number, You could set a pattern tour.
Sway the joystick to record the entire tour. Press Stop to
stop recording tour.
Activation preset tour mode 1 (One way)
Tour
> enter tour number (0, 1-16)
To view pattern tour, enter 0 as tour number.
The speed dome will start the patter tour that you
Have previously set.
Activation preset tour mode 2 (back and forth)
Shift (hold) + Tour
> enter tour number >
Enter
Enter
29
Set Camera:0001
Tour:__[0,1-16]
Add Position#01:___
[ENT / STOP]
Tour:001 Pos#01:001<
[ENT] to save
Camera:0001
Run Tour:__[0,1-16]
Camera:0001
Run Tour:__[0,1-16]