Auto Pm Channel Storage; Resetting Programmable Memory - Kenwood TM-G707 Instruction Manual

AUTO PM CHANNEL STORAGE

After you recalled a PM channel, this function
automatically overwrites the current PM channel with the
present operating environment when:
• You recall another PM channel.
• You press [PM], [PM OFF] .
• You switch OFF the transceiver.
Use the following procedures to activate this function:
1 Press [MNU] to enter Menu mode.
2 Select Menu No. 6 (PM.AT).
3 Press [OK] , then switch the function ON (or OFF).
2
4 Press [OK] again to complete the setting and exit
Menu mode.
1

RESETTING PROGRAMMABLE MEMORY

Use this procedure to reset the PM channels to the
factory defaults.
1 Press [CALL]+[ ].
• A confirmation message appears.
1
• To quit resetting, press any key other than [OK] .
2 Press [OK] .
1
2
3
4
5
2
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
37