Adsl Setting - Planet ADE-4400 User Manual

The following table describes the parameters of this page:
Field Description
VPI The virtual path identifier of the ATM PVC.
VCI The virtual channel identifier of the ATM PVC.
The QoS category of the PVC. You can choose UBR, CBR,
QoS
rt-VBR, or nrt-VBR.
Peak cell rate (PCR) is the maximum rate at which cells can be
PCR transmitted along a connection in the ATM network. Its value
ranges from 1 to 65535.
Cell delay variation tolerance (CDVT) is the amount of delay
CDVT permitted between ATM cells (in microseconds). Its value ranges
from 0 to 4294967295.
Subtain cell rate (SCR) is the maximum rate that traffic can pass
SCR over a PVC without the risk of cell loss. Its value ranges from 0 to
65535.
Maximum burst size (MBS) is the maximum number of cells that
MBS
can be transmitted at the PCR. Its value ranges from 0 to 65535.

3.4.2.3 ADSL Setting

Click ADSL Setting in the left pane, the page shown in the following figure appears. In
this page, you can select the DSL modulation. Mostly, you need to remain this factory
default settings. The router supports these modulations: G.Lite, G.Dmt, T1.413, ADSL2,
ADSL2+, AnnexL, and AnnexM. The router negotiates the modulation modes with the
DSLAM.
35