Wiring The Power Inputs; Led Indicators - B&B Electronics Elinx EIR408-T Manual

Wiring the Power Inputs

V- V+
Note: Terminal blocks are rated for 12-24 AWG wire

LED Indicators

The LED indicators located on the front panel display the power and
network status of the Industrial switch. Refer to the chart below for LED
description and operation.
LED Color
P1 Green
P2 Green
Fault Red
1 ~ 8
Green
(Upper LED)
1 ~ 8
Green
(Lower LED)
4 Manual Documentation Number:
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
V- V+
Description
On Power input 1 is active
Off Power input 1 is inactive
On Power input 2 is active
Off Power input 2 is inactive
On Power input 1 or 2 is inactive
Power input 1 and 2 are both
Off
functional, or no power inputs
On Connected to network
Flashing Networking is active
Off Not connected to network
Connected to network at speed of
On
1000Mbps
Not connected to network or not
Off
working at speed of 1000Mbps
EIR408-T-4712m