Siemens Standard, Advance, Advance Plus, Advance Conference Telephone Manual page 19

– Ring volume? - to change the ring volume.
– Ring tone? - to change the ring tone.
– Alert tone volume? - to change the volume of the alert
tone.
– Speakerphone mode? - to remove echoing from your
speakerphone.
• Configure display? - to configure your phone for automatic
or manual presentation of features prompts on the second
display line when you are on a call. If you choose manual,
push the right or left arrow keys to display prompts.
• Phone test? - to test the followings aspects of your phone:
– LED? - to light all LEDs simultaneously.
– Display? - to activate all pixels in the display.
– Key? - to sound as each key is activated and show key
code for function keys.
– Audio tests? - to sound ring volume, ring tone, and alert
tone.
– Asset ID? - to display the phone's asset ID number.
– Firmware version? - to display the phone's firmware
version.
– Power level? - to show whether a Local Power Supply
is needed for your phone.
– Exit? - to return to the time and date screen.
You can press the Program key, if one appears on your phone,
to reach the Program/Service? prompt.
Also notice the service code numbers in the lower left of the
subprompts available through the Program/Service prompts.
PROGRAM/SERVICE
1-Change destinations?
From the Program/Service prompt, you can dial these numbers
to go directly to these submenus. Similarly, the subsections
within the submenus have numerals that you can dial to go to
those subsections.
16
>