Optiset E Key Module; Optiset E Local Power Supply - Siemens Standard, Advance, Advance Plus, Advance Conference Telephone Manual

Optiset E Key Module

The side-mounted Optiset E Key Module adds 16 keys for
features and line extensions. Up to four Optiset E Key Modules
can be linked together on one phone, for a total of 64 additional
feature keys and up to 29 line extensions. Only the Optiset E
Advance and Advance Plus telephones support this option.
Wall mount kits do not support phones with an Optiset E Key
Module attached.

Optiset E Local Power Supply

The Local Power Supply is required for the Analog Adapter. It
may also be required in other situations, depending on the
Optiset E telephone's configuration, the type of phone cable
used, the length of the phone cable from the communications
server, and the type of communications server used. Only one
Optiset E Local Power Supply can be used at a time on an
Optiset E phone. However, one Local Power Supply can be
used on a primary phone and a second Local Power Supply can
be used on a secondary phone attached to the primary phone
through a Phone Adapter.
Installation of Local Power Supply
To install a local power supply:
1. Disconnect the phone line from the wall jack and from the
phone. New phones should have a line cord attached to the
phone, but may not be plugged into the wall jack. Plug the
line cord (PN 51A4871)
into the jack on the phone and into the jack on the power
supply labeled
2. Plug one end
the phone into the jack on the power supply labeled
10
Figure 8. Optiset E Key Module
.
Digital
of the line cord that you disconnected from
that comes with the power supply
.