Table of Contents
Advertisement
•
AIM standard identifiers are not defined for all codes: the X identifier is assigned to the code for
which the standard is not defined. The y value depends on the selected options (check digit
tested or not, check digit tx or not, etc.).
•
When customizing the Datalogic Standard code identifiers, 1 or 2 identifier characters can be
defined for each code type. If only 1 identifier character is required, the second character must be
selected as FF (disabled).
•
The code identifier can be singly disabled for any code by simply selecting FF as the first
identifier character.
•
Write in the Custom character identifiers in the table above for your records.
48
DATA FORMAT
Advertisement
Table of Contents
