Table of Contents
Advertisement
ADVANCED FORMATTING
Each code field length can be set by either:
a) defining a field separator character to be found in the code itself. In this case you can choose to
discard the code separator character or include it as the last character of the field.
b) defining a match character to be found consecutively repeated in the code itself. In this case the
field ends with the first character that does not match.
c) specifying a specific character length up to the maximum of 99 characters.
d) selecting the last field as variable length (if any).
You must define the same number of fields as selected in step 5, including fields that will not be
transmitted.
Exit and Save Configuration
OR BY
OR BY
OR BY
Ì$-?Î
99
Advertisement
Table of Contents
