System Setup Function; Setting The Av Input-1 Mode; Setting The Av Input-2 Mode; Setting The Av Output Mode - Kenwood KVT-920DVD Instruction Manual

System Setup Function

System Setup Screen-1
A
B
A

Setting the AV Input-1 Mode

Each time you touch [ AV-IN1 ], the mode
switches as follows:
" Navigation "
When the Navigation unit is connected to the AV-
INPUT1 terminal.
" Video "
When the Video Deck is connected to the AV-
INPUT1 terminal.
B

Setting the AV Input-2 Mode

Each time you touch [ AV-IN2 ], the mode
switches as follows:
" Back Camera "
When the Back Camera unit is connected to the
AV-INPUT2 terminal.
" Normal "
When the Video Deck is connected to the AV-
INPUT2 terminal.
C

Setting the AV Output Mode

Each time you touch [ AV-OUT ], the mode
switches as follows:
" DVD "
Picture/sound from DVD/VCD/CD.
" TV "
Picture/sound from television.
" AV-IN1 "
Picture/sound from AV-IN1 terminals.
" AV-IN2 "
Picture/sound from AV-IN2 terminals.
D

Setting the Dual Zone mode

<When the 5.1 ch DSP unit is connected>
The following operation allows separate sound
sources to control the output of the front and
rear speakers.
Each time you touch [ 2zone ], the mode switches
as follows:
" ON "
The dual zone system function is on.
" OFF "
The dual zone system function is off.
12
C
D
E
System Setup Screen-2
F
G
A
E

Selecting the Dual Zone Speaker

<When the 5.1 ch DSP unit is connected>
You can select whether to output AV-OUT
sound from the rear or from the front.
Each time you touch [ 2zone SP ], the mode
switches as follows:
" Normal "
AV-OUT sound send to the rear front speaker.
" Reverse "
AV-OUT sound send to the front speaker.
NOTE
No display [2zone SP] when the "2zone" is set to
"OFF".

Setting the Touch Sensor Tone

F
Each time you touch [ Beep ], the mode switches
as follows:
" ON "
Touch sensor tone is turned on
" OFF "
Touch sensor tone is turned off
Setting the TV Control by Remote
G
On/Off
If this unit also runs when operating other
units with different Kenwood remote controls,
its remote control function can be turned off.
Each time you touch [ REMO ], the mode
switches as follows:
" ON "
Remote control function is on
" OFF "
Remote control function is off

Setting the Auto Scroll Display Function

H
This function permits the text to be scrolled
and the entire text to be displayed. Switching
between manual scrolling and automatic
scrolling is permitted.
Each time you touch [ Scroll ], the mode switches
as follows:
" Auto "
Automatic scrolling
" Manual "
Manual scrolling
H
I