Switching To The Sound Preset Screen; Recalling The Kenwood Preset Sound; Adjusting The Centre Frequency Of The Bass; Adjusting The Bass Quality Factor - Kenwood KVT-920DVD Instruction Manual

Television with dvd receiver
Hide thumbs Also See for KVT-920DVD:
Table of Contents

Advertisement

J
Ending the Audio Control Screen
Touch [ RTN ] to return to the sound effect menu
screen.
E

Switching to the Sound Preset Screen

Touch [ PRO ] to switch to the Sound preset
screen.
NOTE
No display [ PRO ] when the KDS-P900 is
connected.
L

Recalling the Kenwood Preset Sound

Each time you touch [
setting switches between the "Flat", "Easy",
"Jazz", "Pops(Top40)" and "Rock".
Adjusting the Centre Frequency of the
O
Bass
Each time you touch [
centre frequency of the bass as follows:
60 / 70 / 80 / 100 Hz (Only when the bass quality
factor is set to 1.00, 1.25 or 1.50) / 150 Hz (Only
when the bass quality factor is set to 2.00)
K

Adjusting the Bass Quality Factor

Each time you touch [
Bass quality factor as follows:
1.00 / 1.25 / 1.50 / 2.00
Adjusting the Centre Frequency of the
Q
Treble
Each time you touch [
centre frequency of the treble as follows
10.0 / 12.5 / 15.0 / 17.5 kHz

Switching the Bass Extend mode On/Off

M
Each time you touch [ DC ] to switch the function
on and off.
When the function is on, the [ DC ] icon to indicate
to amber and low frequency response is extended
by 20%.
] or [
], the preset sound
] or [
] to switch the
] or [
] to switch the
] or [
]to switch the
N

Setting the Speaker Type

Using this function to set the diameter of the
speaker optimizes the sound quality to the
speaker diameter.
Each time you touch [ SP ] to select the speaker
type as follows:
" STANDARD "
Speaker with a general diameter
" NARROW "
Speaker with small diameter
" WIDE "
Woofer with a large diameter
" MIDDLE "
Woofer with a small diameter
NOTE
This function fine-tunes the settings for bass
centre frequency, bass level, bass quality factor,
bass extension, treble centre frequency, and
treble level which are recalled by Sound preset
under Audio control.
P

Storing Your Sound Settings

Hold down a [ 1 ] - [ 5 ] for two seconds or more
except during the bass centre frequency, bass
level, bass quality factor, bass extension, treble
centre frequency, and treble level adjust mode.
Recalling your sound settings
Touch [ 1 ] - [ 5 ] except during the bass centre
frequency, bass level, bass quality factor, bass
extension, treble centre frequency, and treble
level adjust mode.
R
Ending the Sound Preset Screen
Touch [ RTN ] to return to the audio control
screen.
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents