Combo Function - Thrustmaster Arcade Stick User Manual

3. Press the button/direction that you wish to program with the same function as the
button/direction selected in step 2 above: the LED turns green, and then switches off.
The button/direction pressed in step 3 now has the same function as the button/direction selected
in step 2. The button/direction pressed in step 2 retains its original function.
*If you do not press another button/direction within 5 seconds, the LED will switch off and no changes will have
been made.
Example 1:
Press the PROGRAM button: the LED turns red. Next, press the B button: the red LED flashes.
Finally, press the A button: the LED turns green and then switches off. The A button now
performs the B button's function, while the B button retains its original function.
Example 2:
Press the PROGRAM button: the LED turns red. Next, push the stick up: the red LED flashes.
Finally, press the A button: the LED turns green and then switches off. The A button now
performs the stick's upward movement, while the "up" direction of the stick retains its original
function.
To return to the default configuration:
Press and hold the PROGRAM button (7) for more than 3 seconds: the LED (8) will first turn red
and then green for 2 seconds. This means that the default configuration has been restored.

COMBO FUNCTION

This function enables you to program up to 8 action sequences (or "combos"), which you can use
at any point in the game. Each combo can contain up to 31 consecutive stick movements and
action button presses. This function is 100% compatible with all Xbox™ games where the gamer
is required to carry out action sequences.
Programming a combo:
1. Press the PROGRAM button (7). The LED turns red.
2. Press the COMBO button (9). The LED turns green and flashes for 2 seconds*.
3. When the LED turns red again, press the button or direction corresponding to the first action
in your sequence**.
4. Press the COMBO button. The LED turns green and flashes for 2 seconds*.
5. When the LED turns red again, press the button or direction corresponding to the next action
in your sequence**.
6. Press the COMBO button.
Repeat steps 5 and 6 until you have programmed all the actions in your combo.
7. When you have programmed the final action, press the PROGRAM button.
3/6