Detailed Example Of How To Program A Combo - Thrustmaster Arcade Stick User Manual

DETAILED EXAMPLE OF HOW TO PROGRAM A COMBO:

This is an example of a combo:
- The symbols represent stick movements.
- means that you must press these two buttons at the same time.
- The symbol represents a pause between 2 actions in the sequence.
To program this combo onto the Arcade Stick's A button:
1. Press the PROGRAM button (7).
2. Press the COMBO button (9).
3. Press the direction of the stick.
4. Press the COMBO button.
5. Press the direction of the stick.
6. Press the COMBO button.
7. Press the direction of the stick.
8. Press the COMBO button.
9. Press the direction of the stick.
10. Press the COMBO button.
11. Press the direction of the stick.
12. Press the COMBO button.
13. Press the X button.
14. Press the Y button.
15. Press the COMBO button.
16. Press the COMBO button.
•
•
•
Continue until you have programmed all the actions you require.
47. Press the COMBO button.
48. Press the PROGRAM button.
49. Press the A button.
To use the combo created above, press and hold the COMBO button and then press the A button.
Steps 1 and 2: beginning of the combo
programming process
Steps 3 to 12: programming the first
action ( )
Steps 13 to 15: programming the
second action (
No action programmed: inserting a
pause ( )
Programming the final action
End of the combo programming process
Combo applied to the A button
)
5/6